Home >Products >> SIP Paging


暂无


Intercom
Two SIP lines, supporting SIP 2.0 (RFC3261) and related RFC
Supports two lines RTSP
Voice broadcast IP address
Button or remote volume adjustment
Switch signal input and output
Talkback recording output
Handsfree talking
Default auto answer
Dynamic multicast function
Supports DC or POE power supply
Support for Function key interface
Support monophonic active speakers
Network time synchronization
Action URL / Active URI remote control

Audio
Narrowband speech coding: G.711a / u, G.723.1, G.726-32K, G.729AB
Broadband speech coding: G.722
Half Duplex Echo Cancellation (AEC)
DTMF: In-band, out-of-band DTMF (RFC2833) / SIP Info

Networking/ Protocols
Supports PoE (802.3af)
Primary and secondary DNS servers are supported
Support VLAN
Supports SNTP client
Support VPN L2TP / PPTP / IPSec
Supports SRTP
Support for HTTP / HTTPS web pages
Support Qos: 802.1p / q, DSCP
Support MD5 authentication
Supports Web Filter
DHCP / static / PPPoE
STUN

Physical Specifications
2 RJ45 interface:
Yellow: WAN port 10 / 100M adaptive, support POE
PoE: 802.3af (Class 3: 6.49 ~ 12.95W)
Black: LAN port (Only connected to the original camera)
Cable: Super five lines or better
1 blue indicator (SIP status and network status)
2 volume plus or minus key
1 restore factory settings key
1 recording output interface:
3.5mm standard audio interface
15 Ohm impedance
1 ground screw
1 way passive speaker interface:
Output power: 4Ω, POE / 10W, 12V / 10W,18V / 20W, 24V / 30W; related to supply voltage.
Wire diameter: 18 AWG or larger diameter
Interface:Pluggable terminal block
1 headset speaker:
Output: 32 Ohm 1.2V
interface:Pluggable terminal block
1 DSS key interface (4 lines):
Indicator: Output 5.0V 5mA
Interface:pluggable terminal block
1 way microphone input interface:
Recommendation: Use an electret condenser microphone
Sensitivity: -38dB, Impedance 2.2 K Ohm bias voltage 2.2V
Interface:Pluggable terminal block
1 short circuit input and output interface (built-in relay):
Relay: MAX DC30V / 1A, AC125V / 0.5A,
Interface:pluggable terminal block
2 parallel power input interface: 12V-24V / 2A DC 1 road for the 5.5mm DC power seat 1 road way 2Pin pluggable terminal block
Standby power consumption: DC12V 1.32W / POE 1.78W
Housing material: aluminum alloy shell
Installation: Indoor installation
Operating temperature: -30 ~ 70 ℃
Storage temperature: -40 ~ 70 ℃
Relative humidity: 10% - 95%
Equipment size: 113x83x28mm
Packing size: 138x108x77mm
Equipment weight: 250g


暂无


暂无


暂无
无标题文档
tel:0755-26402199     E-mail:sales@fanvil.com     Version so©   Fanvil Technology Co., Ltd 2014.All rights reserved.